Easy Tips to Secure your Router and Home Network in Minutes

Nowadays, the networking system has made our lives far more feasible and comfortable compared to the older days of the internet running through messed up Ethernet/ USB cables. If you are a Linksys user than can access Linksys extender login via the internet from anywhere sitting at home without getting connected to clutter of cables.

This convenience opens up gates for significantly easy security breaches making you think on how to secure your home networking system. And that’s it, we got you covered.

Wired Connection Methods

This process was used in past and was more secure than wireless upgrades.

Wireless Network

The biggest drawback of Wireless networks is that it can be exploited by anyone.

Moreover, the impact of unauthorized access depends on the purpose of an anonymous person completely. It could be as harmless as your neighbor is trying to ruin your data bandwidth for the sake of saving his bills.

On the other hand, it might be the case too that an unknown person with not so good intention breaches your network to get through the bank details, credit card number, network passwords, emails, personal stuff, etc posing a threat to your privacy and security. In both cases, you might end up losing your privacy and money.

It is always good to secure networks before any sort of disaster occurs.

How to Secure your WiFi Network from Unauthorized Attack?

In order to prevent cybercriminals and mysterious people from stealing your private information, financial details, etc. then you must go through certain steps ranging from basic precautions to advanced measurements for enhancing security of your home networks.

Change the Default Login Credentials

When a user buys a WiFi router, it comes with its own username and password set as default by the device manufacturer. The main problem with using the default login credentials is that many online sites provide databases for default login details for each router model which makes it easy for anybody to peak into your network and access the admin details.

Note: This also causes a brain-teaser issue when someone tries to access Linksys WiFi extender login page for setup and installation of their extender Linksys.

Fix: As soon as you bought a new router or if you haven’t done this already yet, change the default credentials to access the admin panel without any trouble.

To do this, type the default IP address of your router into the address bar field of a web browser in order to open the admin control panel. On the other hand, ensure to choose a unique and strong password for your network in router settings.

If you are experiencing issues in accessing the router admin panel using the above-mentioned step, then without any delay call our technical department on toll-free number 1-844-726-2255.

Note: The login credentials revert back to default whenever you reset the router.

Replace your Network’s Default SSID

The SSID (service set identifier) is the Public name of your main WiFi router’s network. It is set to the model number along with the brand name where it comes from e.g. Linksys.

Fix: In order to keep your network away and safe, change the default SSID (network name) of your router.

This will definitely prevent the unknown people from knowing your router’s make and model number. If the SSID itself reveals the router model then it becomes relatively easy for unknown people to break in your network. Moreover, avoid using your personal information like name, birth date, etc. in the network name.

Enable Network Encryption

It is very essential to have encryption on every home networking router. Provided that data travels over the air, it’s easy for unknown people to intercept your data and trace your online activity. This is a big thing to worry because it brings your financial credentials and privacy to a potential risk of being stolen and cracked.

Fix: Use WPA2 Personal mode. Also, ensure to use uncommon passwords, a set of 16 characters with a proportion of uppercase, lowercase, digits, numbers, alphabets, and special characters (e.g. $, &, !, *, %, etc).

Disable WPS

WiFi Protected Setup (WPS) was created to ease up the process of Linksys extender setup, configuring WiFi connections and to access Linksys range extender login page in a hassle-free manner. Many routers come with WPS enabled by default.

Fix: If you don’t use WPS, then disable it right away. It gives birth to a loophole in the system and anonymous people can breach through by simply brute-forcing the eight (8) digits PIN.

Visit extender.linksys and get brief information on how to setup a Linksys range extender.

Enable Firewall

Firewall is very important for a network to ensure that unsafe or malicious incoming data is blocked. The firewall not only improves the efficiency of the ecosystem but also prevents most of the airborne attacks deployed by cybercriminals.

Fix: Check in router settings and turn it on manually (if not enabled). Moreover, do not forget to install firewall software on your system for additional security. This will control the unnecessary data usage and helps you in saving data bandwidth, personal stuff, and confidential information.

Enable MAC Addresses Filter

Media Access Control (MAC) address is a unique identifier code assigned to a network interface controller (NIC) node on a particular device. Just like IP address, every device connected to the network has a MAC address provided by the manufacturer.

Fix: A soon as you know MAC addresses of all the WiFi devices which you wish to access your home network, you can simply add those addresses in the router settings after enabling the MAC address filtering option. It will only the necessary devices to connect with your internet.

Find the MAC Address

• Open the Command Prompt.

• Type in “ipconfig /all”.

This will show the MAC addresses of the devices connected to your network. Once you have turned on the MAC filter, no third party will be able to connect to your network without your permission.

Note: Always keep the router up-to-date with the latest version. This will bring in security patches and newer protection, performance, and security enhancements.

In this way, you can secure your WiFi network. It takes a couple of minutes to deploy changes in favor of your network security.


  Modified On Jan-11-2019 12:26:56 AM

Leave Comment