Are you thinking of starting your studio or music space? Then you will want to soundproof the space you are planning to use. There are several things that you need to do so that you can soundproof better. You can also check https://quietlivity.com/ for more about soundproofing. Below are some of the ways you can soundproof a room.

1. The use of thicker material

Thick and denser materials will help in absorbing the sound rather than the use of thinner material. You can use think blankets to your wall. Heavy sound curtains also can be very useful. Cover your wall with a new layer of drywall or even sheetrock.

2. The use of separation of two layers of wall

When the sound enters into any new substances mostly some of it is usually absorbed and it can also be reflected. The building of the wall from two sheets with much space between them this called decoupling which makes the wall at blocking.

3. Consider the source of the sound

You must make sure that you have to listen to the noise you want to block out. You may consider the carpet rather than those noisy covering-like tiles or wood. Also avoiding noise or limiting the noise it’s also another cheap and easy method you can consider.

4. The use of clips or channels

These are used between the studs and also the drywalls and they help in reducing the sounds. Sound clips are a very effective method that can absorb with a heavy rubber. Also, you can insert a hat channel mostly resilient channel is a metal channel that is made for soundproofing.

5. The use of damping compound

Damping is a method of soundproof that separates energy from the sound waves hence converting it into heat. This can be used in layers of the wall or floor. This method absorbs low noise. It has a current that is green glue and is the most effective damping compound. Most of the compounds take days or weeks to cure to their full.

6. The use of additional mass/density

You can prevent any sound from entering and exiting in any room. For it to work the wall requires a lot of density hence preventing them from vibrating which response to sound energy. Build your wall with thick and dense materials so that they can be adequate mass.

7. The use of filling air gaps

Soundproofing can be undermined by small cracks and gaps between materials. You can fill the gaps with an elastic sound resistance material. Make sure you fill all the cracks. You can use automatic door bottoms that block all the open space between the bottom door and even the floor. Acoustical caulk can be used to fill up the cracks in the wall of the room.

8. Soundproof ceilings and floors

They are some suitable system that can be used to soundproof the floors and ceiling in most cases people prefer to add a layer of drywall with a damping glue between it. You can cover your floor with soundproofing mats. Then you can install your carpet. If they are is no room before you then you don't need soundproof.

9. Use of decoupling

Decoupling this is a process of blocking the transfer of any sound that is by isolating the contact point. When your structure in your room is in the same direction with each other, this is the best method to use this simply because sound vibration from one may transfer very freely.

10. Installation of soundproof panel

You may also consider this method if the soundproof in your room is not completed the way you wanted. They are is many materials that you can consider using, you can use fiberglass in your room for soundproof.