Are you seeking help forLinksys extender setupor to resolve internet connectivity issues? Do you wanna manage the security of your home networking system smartly and remove dead zones or no signals zones from your area? Fortunately, you have reached the right place. Though you are making use of the world-class and latest Linksys device for the best wireless connectivity it is also the fact that when you are sitting in the remote corner of the house or workplace, you aren’t receiving any signals.
There would be so many reasons for slow, sluggish, and improper signals. Few are metal or concrete wall, usage of wireless bandwidth or position of your main router. Well, the wireless or WiFi signals are nothing but radio waves which get refracted by roof, window or any wall that tends to the weakest or poorest WiFi signals.
Placement of the router at the right and suitable place can resolve the issue but sometimes this process will also not work. Linksys range extender would be the ultimate and final solution to get rid of this problem permanently.
The Installation Process of Linksys WiFi Range Extender
Before the setup process, it is important to understand the installation of your Linksys device. After that, you are supposed to follow the light-weight steps given below:
1.    Consider connecting the antennas of your range extender first and after that the provided power cable. The straight-vertical position would be best for getting the best WiFi signals.
2.    Find out the best location (midway) where you can place your range extender as well as the router. To avoid dead zones, there shouldn’t be difference between both the devices. Trust us that this setup will definitely enhance the existing WiFi signals you have.
3.    Done with the placement process? Fab! Now check the LED (power) lights of your WiFi extender and after few minutes connect your computer or laptop in order to see Linksys WiFi extender login along with its setup.
4.    If the setup process fails to start automatically, then open a web browser and in the address bar of it, type 192.168.1.1 (default IP address).
Can’t connect to Linksys extender? Our tech support team at toll-free number 1-800-924-0563 would be the answer to your question.
The configuration of a Linksys Range Extender through WiFi Protected Setup
WiFi Protected Setup (WPS) makes it very easier to connect your wireless network with the range extender and with the help of this you can also connect other smart devices for sure. For this, you have to open the wireless setup page and hit on the button WiFi Protected Setup. After that:
1.    Push the click button and do not proceed until and unless the pop-up appears in front of your home screen.
2.    On the other hand, you can also press and hold the WPS button on your Linksys router for a few seconds.
3.    As soon as the LED lights on your WiFi extender starts blinking, release the button.
A Very Important Note: You have to do the WPS process twice in order to connect with both bands only if you have a dual-band router.
Steps for Connecting with the Linksys Range Extender’s PIN
All Linksys smart WiFi device can easily get connected via setup PIN. This procedure is workable only if your existing Linksys router consists of the WPS i.e. WiFi Protected Setup menu. For this, what you are going to do:
1.    Type in the PIN into the given fields on the WiFi Protected Setup page of the router.
2.    Once done, click on OK.
At any point, if you need any assistance, ask us for extender.linksys.com Support.
The Web-based Setup Page:-
You can also use the web-based setup process for installation and configuration of your Linksys range extender. To do so, you need to follow and apply some below given steps:
1.    To access the setup page of your Linksys range extender you have to launch an internet browser first.
2.    After that, you have to enter the default IP address of your device into the address bar field. Is that simple?
3.    Hit on the start button and after that, hit the file explorer (based upon your Window).
4.    Once done, click on the network button.
5.    Click on the range extender symbol and view the device’s web page.
6.    Enter the default or customize login details.
7.    You will now be able to access the Web-based set-up page without any issue.
8.    Hit on administration and select factory settings once you are done with the web-based setup process.
9.     To complete the configuration process, restore the factory settings.
10.    Unplug your range extender and after few minutes, plug it back again.
If the setup process doesn’t work after so many attempts of the setup process, then follow some tips below on how to Reset Linksys Range Extender.
In case you are facing any difficulty in setting up your range extender, then try to keep your device on its factory default settings. Below are some reasons that you may encounter:
1.    Receiving any intermittent or discontinuous connections.
2.    Trying to install or configure the range extender and you got trouble doing with its setup software.
3.     Unable to access Linksys extender login page to set up your WiFi extender.
4.    The Power lights are neither blinking nor stable.
With all the aforementioned conditions if you have any requirements of putting your Linksys device on default settings, then you have to create a backup of your extenders device configuration and restore in order to avoid complications in the installation process.
1.    You can easily access the setup page ‘online’.
2.    Hit on the ‘management’ tab and after that, hit on the displayed icon ‘backup configuration’.
3.    Once done, save the entire settings made by you.
A Beneficial Note: Pressing and holding the reset button for few seconds would be the best and easiest method to bring your range extender in reset mode.
Drop your feedback below if the views shared in this article proved helpful for you.