articles

Home / DeveloperSection / Articles / Supercharge your WiFi with Netgear WiFi Range Extender Manual Setup

Supercharge your WiFi with Netgear WiFi Range Extender Manual Setup

Riya Kapoor845 11-Dec-2018

Netgear WiFi extenders are the most widely used network devices around the world. Its usage depends on the network requirement of users. The main functionality of this device is to amplify the weak signals coming from the router and make them reach everywhere in the house or office.Supercharge your WiFi with Netgear WiFi Range Extender Manual Setup

Therefore, they are also known as a booster or repeater. The perfect situation in which Netgear WiFi range extender manual setup becomes the most important includes:

 When you wish to improve the wireless coverage of your home or office network.

 When there is only one wireless connection available and it has to cover a large range.

 In order to expand the signal reach at too far ends of your house such as a garage or basement.

 To provide the WiFi connection to a device present outside the main coverage area of your network.

You can choose any Netgear range extender model available in the market such as Netgear EX2700, EX3800, EX6100, WN3500RP, WN3000 RPV1, WN2500RP, WN2000RPTV3, WN1000RP, EX3920, EX6150, EX6200, EX6920, etc.

Netgear Extender Setup Prerequisites

Netgear WiFi range extenders are the leading networking devices trusted and used by millions across the globe. The main reason behind their popularity is their superb performance and extended network coverage.

Coming back to the new extender setup procedure, let’s have a look at the things you actually need for setting it up:

• A computer, desktop or laptop

It lets you access the default web-based address for Netgear extender i.e. mywifiext.

• Ethernet cables

The next prerequisite is an Ethernet cable. It is used to make a reliable connection between the computer, laptop or desktop and extender. Make sure that the Ethernet cable doesn’t have any sort of cuts in it.

• Stable internet connectivity

A stable internet connection is very much required for making your extender setup a successful task. Any intermittent connectivity can result in issues with mywifiext.net local web address.

So once you have these prerequisites along with you, get started with the process of Netgear WiFi range extender manual setup. Read on.

Setting up the Netgear Extender having an Ethernet Port

Some reports show that users find it easier to set up the extender with an Ethernet port as compared to that of without an Ethernet port. So if you are lucky enough whose extender includes an Ethernet port, go through the step-by-step guide given below:

1. Power on your extender properly.

2. Take a computer, laptop or desktop and turn it on.

3. Access a fast internet connection on it.

4. If you are making use of a protected WiFi network, you have to enter the password to connect to it.

5. Open your favorite web browser.

6. In the address bar placed at the very left side of the window, type www.mywifiext.net and hit enter key.

7. Once prompted, fill in the login details assigned to you.

8. The next window will take you to Netgear genie setup smart wizard.

9. All you have to do now is just precisely follow the commands given on the screen.

10. At last, save the settings made by you.

And that’s it! Your Netgear wireless range extender has set up properly. If you come across any type of technical issue during the process, call our experts at toll-free 1-855-466-3001 and ask them for Netgear extender support.

Setting up the Netgear Extender with no Ethernet Port

Your extender doesn’t include an Ethernet port? If yes, execute the steps highlighted below:

1. Reset the extender to default factory settings.

2. Connect it to any network you like.

3. Thereafter, use your preferred web browser.

4. Make a visit to mywifiext.net setup page.

5. Enter the user ID and password for proceeding further.

6. Walk through the on-screen commands to complete the setup process.

Quick Tip: In case mywifiext.net doesn’t work for you, use 192.168.1.250 IP address for login.

That’s how you can set up Netgear extender with no Ethernet port. But if somehow, you cannot install and configure it, get in touch with our highly-experienced technicians and fetch instant solutions.



Updated 11-Dec-2018

Leave Comment

Comments

Liked By