If you are facing annoying connection issues at your workplace or home, then the very first thing you have to do is check the main reason behind it. Usually, your existing routers do not have the capacity and capability of covering the entire home and proving internet connectivity all over the house. They only provide WiFi signals to the limited area only and the devices beyond that get zero signals. The ultimate solution to this problem is belkin range extender setup.

Most of the times, routers’ signals get disturbed due to obstructions, interferences present nearby like WiFi/Bluetooth devices, metal walls/appliances, electronic gadgets/ toys, cordless phones, baby monitors, etc. which contribute a lot in fading the signals.

As already discussed, Belkin range extender would be the best solution to such brain-teaser problems. Trust us, you will never regret your decision if you are about to invest in Belkin N300 range extender setup.

We heartily welcome you on our post. In this article, we will provide up-to-date information linked to Belkin range extenders, configuration and installation. On the other hand, here you will also get information about belkin.range setup. So, sit back and relax and get ready to perk up your existing router to the better extent.

Before getting started with the setup process, be damn sure that you know the important points for setup Belkin range extender.

First of all, let us make introduce you with the benefits of belkin n300 range extender setup

 Users are free to add network computers (wirelessly) with the wired network. Apart from this, you can also extend the coverage of your wireless networking to the greater extent.

 Belkin extenders have configuration push-button to get connected in a repeater mode safely.

 On the other hand, it also provides reluctant-compatibility with every wireless devices that consist of 802.11b (2.4GHz) frequency.

 Such devices in advance technology can work easily with Windows computers and Mac OS X.

 It also consists of a wireless feature (64- and 128- bit) and WEP, WPA, and WPA2 security.

Before getting started with Belkin.range setup, you must need the following:

• An up-to-date Belkin range extender.

• Damage-free, dust-free, cuts-free and shock-resistance to setup Belkin range extender and to connect your existing WiFi devices with it.

• Network name (SSID) and password of your regular WiFi router.

• If you own dual-band router, you will need its SSID and password (wireless) of both bands.

• A WiFi-enabled device (any).

Best Handy Methods for Belkin Wireless Range Extender Setup

Your Belkin device can easily be set up wirelessly. An installation that is wireless which totally depends upon WiFi Protected Setup (WPS) is known as the simplest way for Belkin setup extender. WPS is a network security standard that is meant to protect the home networking system. Though every Belkin device in today’s modern era comes with this standard feature, still make sure that your existing router too has the capability of supporting this feature.

 Grab a paper clip and insert it into the factory reset hole of your Belkin wireless range extender.

 Hold it and release it after you see blinking lights on your device.

 After a few minutes, apply the same process on your router.

 Both the devices supposed to be plugged in within the reach of each other.

The Process of Belkin Wireless Extender Setup

The installation and configuration of your Belkin device can easily be done via setup wizard. Here, a user has to acquire a web-enabled device that has web browsing potential like tablet or a computer. Let’s take a glance and proceed towards Belkin range extenders setup process.

• Plug in your Belkin n300 wireless range extender into an electrical outlet. Remember, the wall plug should be damaged-free and nearby the router. Avoid doing the setup process in high-voltage and fluctuation.

• With the help of WiFi enabled device, get connected to Belkin.range setup. If you fail to detect the network, then ask our tech support team to reset Belkin range extender.

• Next, you have to open a web browser and in the address bar type the Belkin range extender IP address.

• By opening the next page, hit on the button ‘get started’. This process is very helpful in finding your router’s network name (SSID).

• Make a selection for a wireless network that you wanna extend. Once done with this process, hit ‘next’. If you can’t detect the network name, refresh it once.

• Wait for few minutes and let the setup wizard get connected with your network properly.

• Once completed successfully, hit ‘next’.

Tips to Reset Belkin Range Extender to Factory Defaults

 Hold down the reset button on your Belkin range extender that is situated at the back of your device.

 As soon as you see that the lights on your device start blinking, release the button.

 For more information about the product, its setup and reset process, click www.belkin.range.

Was this article helpful? Drop your feedback below and let us know that how we can improve our services. We will get back to you instantly with a definite solution related to Belkin router extender setup.