This handy and easy user manual can help you in connecting the Belkin range extender to your existing home network and solve common Belkin repeater setup issue. Not only this, you can find more help from our award-winning, 24/7 technical support service.

Important Note: Wireless repeater or expanders are known as another valuable name of WiFi range extenders.
Overview
The LED lights on front panel of your Belkin device gives you information about signal strength, power, and updating.
Power Light and their Status and Description
Blinking or Flashing Blue
•    Booting Up
•    Resetting the device back to factory defaults
•    Upgrading the firmware of device with the version of technology
Solid Blue
•    The device is ready to use
Solid Orange
•    Weak/ poor connection with the main router
Fix: Unplug the range extender, and locate it at central location of the house.
Blinking Orange
•    Not connected to the main router
•    Properly connected but no internet
Fix: Unplug the range extender and plug it back after few minutes. Try to reconnect with your network again.
Side
WiFi Protected Setup (WPS) button and LED
Use WPS button to add WiFi-enabled devices to your home network easily, safely, and securely.
Reset Belkin Range Extender
Press and hold the reset hole on your range extender for couple of seconds. As soon as you see flashing LED lights, consider releasing the button. Do it with the help of paper clip or a pin.
You can also perform the reset process from the from the extender’s browser-based setup page. Navigate to administration and after that hit on factory defaults.
Belkin WiFi Extender Setup
Prior to Belkin extender setup, disable WiFi or Bluetooth devices that are placed within the range of your Belkin device.
•    Place your extender within the range of your existing WiFi router. Place both the devices at central location of your house for better or superior internet coverage.
•    Once done with the placement process, connect them both with each other properly.
•    Wait for few minutes and let the power lights on them become stable.
•    Within the gap of few seconds, grab a computer/ laptop and connect it to range extender with the help of a well-maintained cable.
•    Open a browser and navigate to belkin.range setup page by typing Belkin range extender IP address (default) into the address bar field.
In case you are facing below-mentioned issues like:
•    Doesn’t see any flashing or stable lights on your device.
•    Unable to access belkin.setup page.
•    Extender connected properly but lack of internet or any.
Then make yourself comfortable and free to call our customer support team at toll-free number 1-844-991-0441.
Steps to Access the Browser-based Utility
After setup Belkin range extender process, consider using the extender’s browser-based utility in order to change any settings according to your need, desire or preference.
On a laptop or a computer that is connected with your range extender, open any internet browser and into the address bar type extender.linksys.com. You can also type the default IP address.
Now, you will be prompt to fill or enter username and password. Enter them by default or if you have customized your own login details, enter those and proceed further.
Using WiFi Protected Setup (WPS)
The WPS button makes it very easy to connect your Belkin device to your existing home network and also connect other WiFi-enabled devices to your network via smart wireless range extender.
WPS Light its Status and Description
Solid
WPS connection was successful
Blinking
The WiFi Protected connection is in process
Fix: Unplug your device wait for few minutes and plug it back again.
Belkin router extender setup
Connect the Belkin device to an existing access point
If your router or the access point supports the WPS feature, you can use it to connect the Belkin device to the router or the access point properly and safely. To do so, log in to the browser-based utility and in the left navigation bar click on WPS.
Belkin range extender troubleshooting
If you cannot get your Belkin range extender connected, then check the position of your Belkin device as well as the router.
•    In order to reduce signal obstructions, place both the devices away from masonry walls, metal objects, glass, mirrors or fish tanks, Bluetooth devices, electronic gadgets, etc.
We are the service provider of Belkin as we offer instant support for:
•    Belkin setup page.
•    Belkin range extender reset.
•    Belkin setup extender and much more.
Simply drop your issue whatsoever is in your mind into the comment section below.