With your TP-Link AC1750, you may fail to access the default web address tplinkwifi.net. Might getting the error info, or even just no response at all on the browser.

There are many reasons why this issue occurs with your TP-Link router. Here, we provide some troubleshooting steps to help with it. 

• Make sure your device has been connected to your TP-Link Router’s network. It should be through any type like on WiFi or Ethernet Connection. Otherwise, you cannot access the TP-Link login page with the URL address www.tplinkwifi.net.
• If you receive an error message from your TP-Link router. It might be because you have cached the public IP address of tplinkwifi.net. You need to clear your browser caches and history. Use the following browser to login to TP-Link Router.
• Google Chrome
• Internet Explorer
• Mozilla Firefox
• Apple Safari 

Alternatively, you can also use a different browser or device. For example, if you normally use Google Chrome, then close Google Chrome. Try Mozilla Firefox to access tplinkwifi.net

You can also use the TP-Link router’s IP address http://192.168.0.1 or https://192.168.1.1 to login instead of the default web address tplinkwifi.net.

NOTE: It is very important to know that, the IP address 192.168.0.1 or 192.168.1.1 is not your Router’s IP address, if the Network Manager or Administrator has changed it before.

• If you are using multiple network connections at the same time. Such as wired, wireless and VPN, it is recommended to disable or disconnect all your internet and VPN connections and only wired connection to your TP-Link Router.
• Power cycle your TP-Link Router and ISP Modem, and if possible, also restart your desktops, laptops or phones used to access tplinkwifi.net.
• You can remove the power cable and plug it back in after 5 seconds. Press on the power button twice to reboot your TP-Link Router.
• For the Computer or Mobile device, you can temporarily disable the firewall and antivirus software. It happens whenever it thinks the login web page insecure and blocks them.
• You can go to the Control Panel of your Windows PC to disable the Windows firewall.

If these above methods still fail to access your Router’s login page, you may try the factory reset to TP-Link AC1750 Router.

NOTE: After you perform a factory reset, all your Router settings and configurations will go to the factory settings, including your personalized SSID Name and WiFi password, login username and password, and other advanced functions.

If all these methods are still failed, you will need to contact TP-Link support to further troubleshoot your issue. You can contact our technical support team.

How to use the inbuilt features Archer C5400X?

TP-Link C5400X's first gaming router that is purely for the uninterrupted gaming experience. It is inbuilt with 1.8GHz 64-bit quad-core CPU, 3 co-processors and 1GB RAM. C5400X is a Tri-band with blazing fast speed at 5334 Mbps in total. With features like HomeCare for all-around protection e.g. Parental Control, Antivirus, QoS. You can set up the VPN acceleration for 5 times faster VPN connection.

As per speed limit setup for WiFi frequency:

1. 1000Mbps for 2.4GHz
2. 2167Mbps for 5GHz
3. 2167Mbps for 5GHz

Here, we mentioned 5GHz two times because as you know it is a Tri-band Router. It gives you three WiFi Networks i.e. 2.4GHz, 5GHz-1, 5GHz-2.

Some of the Advanced Features inbuilt in your TP-Link C5400X Router:

1. Working Mode (Router Mode or AP Mode)
2. Wireless Schedule
3. Time Machine
4. TP-Link DDNS
5. Parental Controls/Antivirus/QoS
6. IPv6
7. VPN Server (OpenVPN and PPTP Servers)
8. NAT Forwarding(DMZ/UPnP)
9. Link aggregation(WAN/LAN)
10. Airtime Fairness
11. SmartConnect
12. Portal Authentication for Guest WiFi

Let’s us describe you the above features:

• Working Mode: TP-Link Router came with two working modes that help you connect with the existing modem.
• Wireless Schedule: Wireless Scheduler feature allows you to enable or disable the Wireless Network at a Specific time or interval.
• Time Machine: Time Machine feature that lets you set up an automatic backup for the entire Mac system to a USB Hard disk connected to the TP-Link Router.
• TP-Link DDNS: TP-Link DDNS (Dynamic Domain Name System) is a feature to bind your TP-Link Router which has a Dynamic IP address assigned by ISP(Internet service provider) to a static domain name. TP-Link router used for establishing your website, FTP server or other servers.
• Parental Control: Parental Control features help you to block unwanted content or URL.
• IPv6: Internet Protocol Version 6 (IPv6) is an Internet Protocol (IP) used for carrying data in packets from a source to a destination over various networks. IPv6 is the enhanced version of IPv4.
• VPN Server: VPN server helps you to set up the VPN for your TP-Link Router.
• NAT Forwarding: NAT Forwarding is known for the gaming experience. These features used for Xbox and SonyPlaystation for multiplayer or online chatting.
• SmartConnect: Smart Connect is a feature in TP-Link that promises to simplify the wireless connection. It ensures that you get the suitable WiFi from your tri-band router. Smart Connect prioritizes your wireless devices.

SECURITY:

Malicious Content Filter, Intrusion Prevention System, and Infected Device Quarantine are available in your TP-Link Router. If you need help to set up the TP-Link Router, you can contact our Technician.