Tiles with grout lines seem attractive and your proper maintenance keeps them clean and shiner. Sometimes, moisture, dirt, mould and mildew are all the problems that can be a serious issue in your home. By these issues, you have to deal with dirty or broken grout lines. But, you can not forget the fact about grout that it is a cementitious material. And, professionals use it to protect the edges of the tiles. However, grout has a low tensile strength because it is made of cement, but it can be cracked due to some reasons. Well, you can solve these issues by following our easy guidelines.

Easy Steps to Fix the Grout Issues

• Remove the old grout: In the first step, you have to remove the old grout first. So, dig out the old grout and try to remove the old shower grout. For removing old shower grout, you can use an old dull knife or blade. Simply, fix it in the right direction and remove old grout. But also take care of tiles edges, don't scratch the edges of the tiles and work carefully. If you have a wide grout, you may work hard to pass the knife often. Once the knife or blade passes easily through the grout lines, proceed with the new step of shower regrouting.
• Use vacuum cleaner: Use a quality vacuum cleaner to remove the remaining particles of old grout. The vacuum cleaner will help to remove any remaining pieces of old shower grout as well as it also removes dust, dirt and other dust particles from the tile surface.
• Prepare the grout area through cleaning: Wipe up the grout area to receive the new and fresh grout. Vinegar or liquid dish soap is the best option to clean the grout area. Use both items with equal quantity and make a sufficient cleanser to apply it over the grout area. Further, add 2 cups of water into the mixture to increase the quantity of mixture. Apply the mixture on the grout area to clean the surface. Well, we also offer grout cleaning services, you can call us for services at any time.
• Make grout paste: Read instructions carefully of the product of grout powder and mix up the grout powder according to the manufacturer's guidance. Add water gently and check humidity levels in the air because it also can affect the grout mixture. When you see the grout powder has sufficient consistency like peanut butter, apply it. If you want to get another kind of information about regrouting, you can contact our expert tile cleaners.
• Apply the mixture: Pick up the grout mixture with the grout float and set it over the tiles at a 45-degree angle so that you can spread the grout mixture between the joints. Now, you have to move the float by using several angles over the same area and make sure that you are covering the whole all joint including gaps too.
• Remove the excess mixture from the surface: Apply the grout float closer to 90-degrees, and scrape off the excess mixture of the grout. Leave the mixture for a while to dry up.
• Clean the area: Before cleaning the area, make sure that the grout is completely dry. Use dampen sponge to clean the grout area, don't use water after applying the mixture. After 24 hours, you can clean the area with water. But now, move the sponge around the grout lines to remaining excess grout from the tile surface. If you want to get other services like professional floor tile cleaning, can call us.
  

Get Professional Services With The Quickest Procedure

If you are searching for a reliable company where you can hire professional workers to do your job. Come to Kangaroo Cleaning Services, it is the best place where you can hire experts for Professional Regrouting in Sydney. We work with the quickest procedure and offer services at reasonable prices. So, call us now and get instant services at your doorstep.