How to fix Belkin Range Extender Won’t Connect To Wireless Router?

Hi friends Have a very warm welcome! If I am right you are here to find why your Belkin Extender won't connected to internet?

We comes up with some simple steps to fix this.Before that be aware of some reasons why your Belkin extender not working.

a. Placed your range extender out-of network area.

b. Incorrect wireless settings.

c. Outdated firmware.

Solutions:-

1. Hard reset your range extender:-

>>> To reset it, you need to press and hold the reset button for 15 seconds and then release it.

>>> once you will release it, you have to power it off and then it back on.

2. setup your Belkin range extender:-

>>> Once the Belkin range extender will be power on. Connect your Belkin range extender to the PC.

>>> In the web browser open Belkin.range or type 192.168.206.1

>>> The setup page will prompt, here you need to click on setup.

>>> Now you will able to see the list of the network.choose your wifi network and click on on next.

>>> Type the password. So you need to type your WiFi password here and press next,Make sure you are typing the correct password.

>>> It’s will start setting up, which may take little time so wait there for a while.

>>> Finally, the range extender will setup, now unplug the extender and place it where you are getting low signal strength.

I hope you will get rid of this problem with the instructions listed above.

If you have any other problem. you may visit for fixing blog .com

articles